|
Always seeking to provide the most
efficient methods to meet our customers' manufacturing needs, Alabama Laser has added a
Trumpf Trumatic 6000 Laserpress to our job shop. This new system is a combination machine which is able to both punch and
laser cut, opening up a vast number of new possibilities for productivity and flexibility
- Start-to-finish machining -- The workpiece is machined from
start to finish in a single clamping. This means that you can machine a part using several
different methods without having to switch machines midway
- Minimal dead area -- The two machining stations are arranged
in such a way that they can machine the workpiece with almost no dead area.
|
|
In order to be more competitive by optimizing production, the Trumatic 6000
is connected to our new material rack tower, which allows it to run virtually unattended.
|
Combined Processes
|
 |
Laser Cutting:
The laser head contains a contactless automatic height adjustment which maintains a
constant distance between the cutting nozzle and the workpiece. This enables the laser to
cut even on pre-formed components.Punching:
The punching head can achieve a stroke rate of 900 strokes per minute during
punching and 2800 strokes per minute during marking.
|
|
Information & 1st
three photos on this page courtesy of TRUMPF.
Alabama
Laser Technologies
A Division of Alabama Specialty Products, Inc.
P.O. Box 55
55 Laser Blvd.
Munford, AL 36268
Phone:
(256) 358-9055
Fax: (256) 358-4515
E-mail: alt@alspi.com
Return
to Alabama Laser Technologies homepage
|
