|
|
Laser Machining Capabilities
(These are lasers used in our
job shop and research facility and are not sold by Alabama Laser
Technologies.) |
ALS Express 3000 Watt CO2 Laser Cutter (3 systems)
- Capable of holding 5' x 10' sheets
- Continuous wave or pulsed laser capabilities
- Cuts up to 3/4" thick on carbon steel
- Precision cut parts with tolerances held to ± .005"
(depending on material and thickness)
- Special beam conditioning which allows for better cuts on
thick sheets
- Contouring speeds of 1,000 in/min
- Linear motor drives
- 1.33 G acceleration
- High production run capability
ALS Express 6000 Watt CO2 Laser Cutter
- Capable of holding 5' x 10' sheets
- Contouring speeds of 1,000 in/min
- Cuts up to 3/4" thick on carbon steel
- Precision cut parts with tolerances held to ±
.005" (depending on material and thickness)
- Special beam conditioning which allows for better cuts on
thick sheets
- Linear motor drives
- 2.5 G acceleration
- High production run capability
ALS 1000 Watt CO2 Laser Cutter
- Continuous wave or pulsed laser capabilities
- Cuts up to 5/16" thick on mild steel
- Precision cut parts with tolerances held to ±
.005" (depending on material and thickness)
- Precision 24" x 24" moving table system
- Low volume small parts production
Lumonics 5-Axis 2200 Watt CO2 Laser System
- Laser cutting and welding
- For processing 3 dimensional parts
- 6' x 8' work area
Click here for more on the 5-axis
laser.
BLM-Adige LaserTube LT652 CO2 Laser Cutter
- Cuts slots and holes in round tubing with diameters up to
5.5"
- Cuts slots and holes in square tubing with diameters up to
4.7"
- Automatic loading and positioning of tubes between 10.5 and 21
feet long
- High flexibility allowing cuts on any profile either on end of
tube or along length
BLM-Adige LaserTube LT712D CO2 Laser Cutter
- Cuts slots and holes in round tubing with diameters up to
5.5"
- Cuts slots and holes in square tubing with diameters up to
4.7"
- Automatic loading and positioning of tubes between 10.5 and
27.5 feet long
- High flexibility allowing cuts on any profile either on end of
tube or along length
Lumonics 400 Watt & 500 Watt YAG Laser Systems (2
systems)
- Laser welder/cutter
- Ultilizes fiber optics beam delivery to produce exceptionally
precise, clean welds
- Pulsed laser cutting
- Laser welding with minimal heat distortion of parts
- Precision cut parts with tolerances held to ± .002"
- Precision hole drilling
- Flat and rotary welding capabilities
Bystronics 2800 Watt CO2 Laser Cutter
- Capable of holding 5' x 10' sheets
- Continuous or pulsed laser capabilities
- Cuts up to 5/8" thick on mild steel
- Precision cut parts with tolerances held to ± .005"
(depending on material and thickness)
- Nesting capabilities
- Tube cutting capabilities
- Flying optics head -- multi-axis machining abilities while
allowing the work piece to remain stationary
- Tube cutting capabilities -- 14" OD x 1/2" wall
- Non-metal capabilities: plastics, plexiglass, wood, etc.
Mitsubishi 1600 Watt CO2 Laser Cutter
- Capable of holding 4' x 4' sheets
- Continuous wave or pulsed laser capabilities
- Cuts up to 3/8" thick on mild steel
- Precision cut parts with tolerances held to ± .005"
(depending on material and thickness)
- Low volume, small parts production
- Non-metal capabilities: plastics, plexiglass, wood, etc.
Mitsubishi 2000 Watt CO2 Laser Cutter
- Capable of holding 5' x 10' sheets
- Continuous wave or pulsed laser capabilities
- Cuts up to 1/2" thick on mild steel
- Precision cut parts with tolerances held to ± .005"
(depending on material and thickness)
Laservall Laser Etching System
- Capable of etching carbon steel, stainless steel, aluminum,
copper, mirror-finished stainless, plastics
- Capable of etching different font letters, numbers, shapes,
lines, and logos
- Adjustable depth and darkness
Trumpf Trumatic 6000
Laserpress
- Combination laser cutting system & punch press.
See Laserpress.
Lasers for Special Projects / Laser Research
(6 systems)
Nuvonyx 1000 Watt Fiber-Delivered, Direct Diode Laser
Nuvonyx 4000 Watt Direct Diode Laser
IPG 1600 Watt Fiber Laser
IPG 150 Watt Single Mode Fiber Laser
1000 Watt CO2 Laser
1500 Watt CO2 Laser
Alabama Laser Technologies
A Division of Alabama Specialty Products, Inc.
P.O. Box 55
55 Laser Blvd.
Munford, AL 36268
Phone: (256) 358-9055
Fax: (256) 358-4515
E-mail: alt@alspi.com
Return to Alabama Laser Technologies
homepage
