MS2510 Receiver

View PDF version
User's Manual in PDF
The MS2510 receiver is designed to be used with MS2500 and MS2600 transmitters to provide a single channel stand-alone system. The transmitter is mounted close to a corrosion monitoring probe. Only a single twisted pair cable is required to connect the transmitter to the MS2510 receiver.

The color touch screen of the MS2510 receiver provides a local display of the corrosion monitoring data received from the transmitter. The transmitter/receiver system is especially useful where a process monitoring computer is not readily accessible. Transmitter-to-receiver distances up to 10,000 feet with safety barriers are possible.

The MS2510 receiver is powered by 100-240 VAC and provides the 24 VDC supply for powering the transmitter’s 4-20 mA loop. The receiver processes the 4-20 mA signal to provide a digital readout of the cumulative metal loss and the probe corrosion rate based on the monitoring period set by the user (48 hours, 7 days, 15 days or 30 days).

The MS2510 also offers an integrated web server. This feature allows users to access the MS2510 from any PC on the network using a standard web browser. Through this interface users can view data and make setup changes to the MS2510.

MS2510 - corrosion instrument - receiver

Technical Specifications

Receiver & Transmitter System
Input: One probe
Maximum transmitter to receiver distance: 10,000 feet
Output: Color touch screen;
Metal loss (mils) or Corrosion Rate (mpy)
Resolution: ± 0.1 mpy or 0.01 mil
Mounting: Panel or Rack Mount
Power Supply  
Voltage: 100 - 240 V AC, 1 phase, 50/60 Hz
Current: < 2 Amps
Input: 4 - 20 mA current loop
Voltage: 24V DC
Input Impedance: 250 Ohms
MS2510 Receiver  
Operating Temperature: 32° to 122°F (0° to 50°C)
Weight: 4 lbs. (1.9 kg)
Size: 8.25" x 10" x 6" (20.95 cm x 25.40 cm x 15.24 cm)
Panel cutout: 8.25" x 10" (20.95 cm x 25.40 cm)
Use a Crossover cable to connect the instrument directly to a PC.
Use a Straight cable to connect the instrument to a network switch or router.

  Metal Samples Company
P.O. Box 8
152 Metal Samples Rd.
Munford, AL 36268
Phone: (256) 358-4202
Fax: (256) 358-4515

   Metal Samples Company is a division of Alabama Specialty Products, Inc. - Copyright © 2018