Embedding Unit | Incubation Unit | Refrigeration Bath | Home
|
Tissue
Slicer | Thickness
Gauge | Coring
Press | Coring
Tools | Embedding Unit | Incubation Unit | Refrigeration Bath | Home |
Contact Us |
|
The Recirculating Refrigeration Bath can be used as a separate unit or in conjunction with the Krumdieck Tissue Slicer. The refrigeration bath connects to the cooling block located at the bottom of the slicer's reservoir by means of flexible tubing. Refrigerated water or coolant from the bath is circulated through the cooling block, allowing the regulation of the temperature of the buffer solution within the reservoir. Since the recirculated coolant does not come in contact with the buffer, aseptic conditions can be maintained in the buffer solution and the reservoir. The Recirculating Refrigeration Bath can also be used as a heated bath for other laboratory uses. A combination force/suction pump allows circulation to an open container if needed. |
|
Temperature Range: -12° to +100°
Cooling Capacity: 350 Watts at 20° (50Hz models 290W at 20°)
Pumping Capacity: 13 Lpm at 0' head (Max head 16')
Heater: 800 Watts (50Hz 1000W heater)
Bath Volume: 1.3 gal. / 5.0 liters
Dimensions (H x W x D): 20 x 8.75 x 12.375 in (50.8 x 22.2 x 31.4 cm)
Electrical Requirements: 115 V, 60Hz, 11 Amps (220/240 V, 50Hz, 7 Amps)
MD2800 - RECIRCULATING REFRIGERATION BATH
Return to Alabama Research & Development homepage
