 |
Alabama Laser uses SteelMaster
machines to deburr parts. These machines replace a finishing step that was
once done manually on hand grinders. With the SteelMasters you don't miss an
edge, a hole, or a burr.
In addition to deburring, the
SteelMasters are also used to put finishes on parts that don't need to be
deburred. Sometimes a polish or a grain needs to be placed on material for
aesthetic purposes. Our 37-inch wide machine allows us to grain a 37-inch
width with indefinite length.
|
Alabama
Laser Technologies
A Division of Alabama Specialty Products, Inc.
P.O. Box 55
55 Laser Blvd.
Munford, AL 36268
Phone:
(256) 358-9055
Fax: (256) 358-4515
E-mail: alt@alspi.com
Return
to Alabama Laser Technologies homepage
|