The following video clips are in .wmv (Windows Media) format (100k for dial-up modem or
500k for broadband).
To view these clips you will need Windows Media Player (Version 7 or later).
Download
from Microsoft's web site.
| Alabama Laser Home Laser Metal Dep Home
|
![]() |
This video clip shows the repair of a damaged tool
from a metal folding machine. A laser cladding process is used to
repair the damaged tool and then the deposited area is machined to the
required tolerances. This process uses a powder feeder. 100k | 500k |
|||
|
The same laser cladding process as above showing the melt pool. 100k | 500k |
||||
|
Damage on the O-ring grooves of this part is repaired with a laser metal deposition process using a powder feeder. 100k | 500k |
||||
![]() |
Metal deposition done with the use of a powder feeder. 100k | 500k |
||||
![]() |
Metal deposition done with the use of a wire feeder. 500k |
Send comments or suggestions to alt@alspi.com.