| Model |
|
| MS1000 - LPR Corrosion Meter (Ordering # IN1000) |
| |
|
| Physical Data |
|
| Instrument Weight: |
0.84 lb. (0.38 Kg) |
| Total Weight w/ Carrying Case & Accessories: |
5.20 lb. (2.36 Kg) |
| Instrument Dimensions: |
7.63"H x 4.15W x 1.3"D (19.38cm x 10.54cm x 3.30cm) |
| Carrying Case Dimensions: |
10" H x 11.75" W x 5.4" D (25.40cm x 29.85cm x 13.72cm) |
| Operating Temperature: |
32° to 122°F (0° to 50°C) |
| Storage Temperature: |
-4° to 158°F (-20° to 70°C) |
| |
|
| Performance Data |
|
| Measurement Type: |
2-Electrode LPR, Galvanic |
| Range: |
2-Electrode: 0-40 mpy Galvanic: 0-80 µA |
| Resolution: |
2-Electrode: 0.02 mpy Galvanic: 0.04 µA |
| Cycle Time: |
Corrosion Rate: 60 sec ZRA: 30 sec |
| |
|
| Electrical Data |
|
| Power Requirements: |
One 9V Li-Ion Rechargeable Battery (see below) |
| Maximum Probe Cable Distance: |
2000 ft (609.6 m) |
| |
|
| Special Features |
|
- Microprocessor-based electronics
- Function key interface using 4-key keypad and 4-line LCD display
- Low-battery detection
- Portable
|
| |
|
| Accessory Items |
|
| Carrying Case, 10' Probe Cable, Battery Charger, Lightweight Protective Case, Meter Prover,
Operation Manual |
| |
| New Li-Ion Rechargeable Battery |
Li-Ion battery charges faster and has a longer life than pervious NiCad battery (400mAH as opposed to 120mAH.)
Li-Ion Charger features:
• Multi-voltage input for domestic & international use (100-240 VAC 50/60Hz)
• Automatic cut-off when battery is charged (to prevent over-charging)
• Red/Green LED's to indicate when battery is charging/full |
